Have you dealt with some problems like back in pain and neck aching – because your mattress didn’t feel right? And then you managed to choose a good topper that eased all your concerns away and everything has been excellent until you notice the topper doesn’t stay fixed. It even moves and slides inches from its original position. How annoying can it be? But worry not. We have come with several useful tips and you might also try all of them to figure out what works best for you. This article will show you how to keep mattress topper from sliding with 7 simple but effective ways.
If you want to buy a good mattress topper, visit https://www.thebestmattresstopper.com to see the list of top rated mattress toppers. That website is a great source about mattress topper which will help you to pick the right topper for your bed easier.
Why Does Your Mattress Topper Slide off?
There is a reason for everything, the one you are facing might be one of the followings:
- The size is not suitable: The manufacturers sometimes offer toppers of slightly larger or smaller sizes. If it doesn’t fit your mattress perfectly, it can slide off.
- Your bed doesn’t have headboard and footboard: Higher boards are capable of holding the layers of bedding in place and keeping them secured.
- Your mattress is too sleek on the surface: Both natural and synthetic materials might be overly smooth depending on the weaving. A surface like this has little to no friction with the topper.
- Active sleepers: Certainly, the position of your mattress topper is affected by the impulse of movement. Do you often subconsciously move and shift during sleep? That might be it!
How to Keep Mattress Topper from Sliding – 7 Easy Ways
You have known the reasons, now it’s time for solutions!
#1 Add a bed sheet to prevent your topper from sliding
First of all, this method won’t void any warranty. Spreading a fitted sheet over mattress topper will give it another layer of protection against stains and dirt, but it’s only a temporary solution. It slows down the process of sliding, not stopping it completely.
#2 Use safety pins
Does it sound like a terrible idea because what if the pins shred the texture of your topper? Don’t be scared! It’s actually a low-cost method without consuming too much time if you follow these instructions:
- Choose large pins. They are thick and last long.
- Give each side at least five pins.
- Make sure the needles are downwards so they won’t be dangerous for anyone resting on the bed.
#3 Using velcro can help keep topper from sliding
Here’s a tip on the opposite with the one mentioned above in terms of simplicity. Don’t hesitate to try it out if you are confident in your skillful hands since it’s probably the best way to keep your mattress topper fixed! The perks of this method are it’s more secure and not going to loosen up so quickly.
Each Velcro has a ‘hook’ and a ‘loop’. Attach the hook to your mattress topper and the loop to your mattress before fixating them with safety pins or even just a needle. Ensure that the soft and the sharp sides of the Velcro match when you put the topper on the bed.
#4 Sheet straps/suspenders
They might come with your bed sheets or a bed frame, both are ideal! Unlike tightly fitted sheets that lose their magic after a couple of hours, straps are bound to leave no room for your bedding tiers to move and you won’t have to adjust them every now and then. Even if you are a restless sleeper, problems solved. Just make sure the straps are tight enough!
#5 Try duct tape to keep topper from sliding
Duct tape is a quite unusual way to fixate your topper yet if you have nothing else to use, remember it is made to hold things together. However, you will likely need a sheet above the topper after you have taped the corners of it to the mattress.
Warning: A spray adhesive should be the last option you should take into consideration as it might stain your mattress and void the warranty.
#6 Non-skid Mats
They are generally used under rugs or in the bathroom to prevent slipping but did you know they also work in the situation we are having here? No physical effort required: you only need to insert them between the mattress and the topper and feel the miracle! On top of that, non-skid mats perform exceptionally well on latex or memory foam mattresses.
#7 Cotton and Cotton/Polyester Blend pads
If your mattress topper slides because the surface beneath it is too slick, a simple pad atop it will increase the friction and keep the topper still.
To wrap it up
Who would enjoy a rest if their bedding keeps sliding off? An uncomfortable bed will cause you to toss and turn, and the purpose of resting fails. We all want to wake up the next morning with a relaxed body and mind, and knowing how to prevent your mattress topper from slipping is essential.